Geocell Ground Grid-manufacture,factory,supplier from China

(Total 10 Products for Geocell Ground Grid)
Plastic Grass Paving Grid 50mm for Lawn Parking Lot DrivewayPlastic grass paving grid is made from PP or HDPE (high-molecular polyethylene) with fiber and age resistor, using high pressure to inject plastic to form bee nest-like shaped shell, with stereo space and support level. It’s widely used in parking lot, fire exit, fire climbing surface, pavement etc.
  Contact Now
Plastic Grass Paving Grid 50mm for Lawn Parking Lot DrivewayPlastic grass paving grid is made from PP or HDPE (high-molecular polyethylene) with fiber and age resistor, using high pressure to inject plastic to form bee nest-like shaped shell, with stereo space and support level. It’s widely used in parking lot, fire exit, fire climbing surface, pavement etc.
  Contact Now
Product DescriptionPlastic grass paving grid is made from HDPE(high-molecular polyethylene)with fiber and age resistor, using high pressure to inject plastic to form bee nestlike shaped shell,with stereo space and support level.
  Contact Now
The geocell is three dimensional, honeycomb like structures manufactured from high density polyethylene and jointly welded by ultrasonic technique. It is flexible to fold during the transport and installation on construction site.
  Contact Now
Product DetailsHDPE Geocell is made of a new type of high strength geosynthetic, which is popular with both domestic and abroad, in accordance with GB/T 19274-2003 implementation of the standards, which welding the strengthened HDPE sheets by the high-power ultrasonic and forming to be a structure of three-dimensional reticular formation which is easily folding and convenient for transportation.When it is be in construction,the HDPE geocell can be pull into a network and launched into a three-dimensional honeycomb grid.As it filled in sol,macadam,concrete or other granular materials,
  Contact Now
Product DescriptionPlastic grass paving grid is made from HDPE(high-molecular polyethylene)with fiber and age resistor, using high pressure to inject plastic to form bee nestlike shaped shell,with stereo space and support level.
  Contact Now
Product DetailsHdpe geocell is made from a brand new form of high electricity geosynthetic, that's popular with both domestic and abroad, in accordance with gb/t 19274-2003 implementation of the requirements, which welding the bolstered hdpe sheets via way of the excessive-strength ultrasonic and forming to be a structure of three-dimensional reticular formation this is without problem folding.And handy for transportation.Even as it is be in introduction,the hdpe geocell can be pull right into a network and launched right into a 3-dimensional honeycomb grid.Because it filled in sol,macadam
  Contact Now
Product DetailsWhen it is be in construction,the hdpe geocell may be pull right into a community and launched into a three-dimensional honeycomb grid.As it crammed in sol,macadam,concrete or other granular materials,constituted to be a production which has robust sidewise restraint and excessive rate of stiffness.ParameterProduct TypeHeight (mm)Welding Distance (mm)Thickness (mm)Tensile Strength of Welding Points (N/cm)Tensile Strength of Commection of Cells (N/cm)Tensile Strength of Yield of Each Sheet (Mpa)Smooth and Not Perforated50MM≤H≤250330MM ≤A≤ 10001.0-1.421002120220Smooth an
  Contact Now
The geocell is three dimensional, honeycomb like structures manufactured from high density polyethylene and jointly welded by ultrasonic technique. It is flexible to fold during the transport and installation on construction site.
  Contact Now
Product Details Twisted package pp fiber is evolved for replacement of metallic fiber. With polypropylene as its uncooked fabric,it is produced via special drawing twisting and floor remedy. In comparison with metal fiber, it has advantages of acid, alkali resistant, terrific tensile, easy dispersing, convenience for creation and no damage to the integration device. ParameterDensity(g/cm³)0.91Tensile Strength(Mpa)≥ 450MpaLength(mm)38,50,54mmElastic Modulus(Mpa)>4000ColorWhite/Black/GreyEquivalent Dia(mm)0.3±0.05Material100% polypropyleneCrack Elongation(%)≥15ShapeTwist 
  Contact Now
Relate News
What is the features of geocell ?    Geocell is a three-dimensional mesh cell structure formed by high strength welding of reinforced HDPE sheet material. It is generally welded by ultrasonic needle.
Construction site: it is required to be compacted, leveled, horizontal, and the sharp protrusions shall be removed.Grating laying: on a flat and compacted site, the main stress direction (longitudinal) of the installed and laid grating shall be perpendicular to the axis direction of the embankment, and the laying shall be flat, wrinkle free, and tensioned as far as possible. Fix the grid with dowels and earth rock weights. The main stress direction of the paved grid should be full length without joints.
The Advantages Of Plastic Grass Grid Over Grass Planting Brick  The wheel pressure of the car is 100 tons /㎡, parking on the general grass will make the floor sink, at the same time, the car will roll the grass roots, in order to solve this problem, generally adopt the following two ways, one is to lay grass bricks, the other is to lay plastic grass.
In the winter season, because of its climate, environment and other factors, there will inevitably be some difficulties during construction. For example, when constructing geogrids, we have to work hard to face many problems. . In areas with repeated freezing and thawing, when the day and night average temperature is below -3°C for more than 10 consecutive days, subgrade construction is called subgrade winter construction. When the day and night average temperature rises above -3°C, but the frozen soil is not completely melted, Construction is also carried out in winter.   1.
Nov. 04th 2022Shandong Luke Composite Co., Ltd loaded the 1x40HQ container with 5600 cartons of HDPE Geocell, which will be shipped to NewYork port from Qingdao port on Nov. 11th 2022.
High Tensile Strength Low ElongationExcellent soil stabilizationGood sub-base reinforcementAnti-corrosion Easy to install
Plastic geogrid consists of biaxial geogrid and uniaxial geogrid in keeping with its structure.Biaxial geogrid is manufactured from polyethylene or immoderate density polyethylene as the principle raw fabric through the tactics of warm-soften extrusion, vertical and horizontal stretching to shape a excessive energy reinforced square mesh form.Uniaxial geogrid is made from high molecular polymer after extruded and laminated and punched into everyday mesh before longitudinal stretching.this machine makes immoderate molecule in direct line united states in square oval net shape with uniform distr
Plastic geogrid includes biaxial geogrid and uniaxial geogrid in line with its shape.Biaxial geogrid is product of polyethylene or excessive density polyethylene as the principle uncooked material through the approaches of heat-soften extrusion, vertical and horizontal stretching to form a excessive power reinforced rectangular mesh shape.Uniaxial geogrid is product of excessive molecular polymer after extruded and laminated and punched into normal mesh earlier than longitudinal stretching.this device makes excessive molecule in direct line u . s .
In May, the year of 2022, we developed a new product - Fiberglass Mesh Fabric.This product is more stable and more convenient than concrete fibers.It is different from concrete fibers, it is mainly used in wall treatment applications.It has stable structure, high strength, alkali resistance, corrosion resistance and crack resistance, and is mainly used for external wall insulation.Our mesh size can be 5*5mm, 4*5mm, 4*4mm or customized according to customer requirements.This product is small in size and large in capacity.
In December 2023, we shipped 1x40HQ with Polypropylene Concrete Fibers to Poland.